|
 |
Home |  |
|
Brooches | |
|
Pendants | |
|
Earrings | |
|
Cuff Links | |
|
Spare Parts | |
|
Clocks & Whistles | |
|
Weather Vanes | |
|
Napkin Rings | |
|
Spoons | |
|
Odyssey Books | |
|
About Us | |
|
Shopping Basket | |
GABLE END FIXING - MEDIUM AND LARGE VANES ONLY
This is the most common type of fixing we supply - use on the gable end of a building, or a chimney.
|
|
|
|
Use on or under the barge board |
Detail of gable bracket and pole for medium size weathervane. The clearance is 6" from the wall to the hole centre. | The large size weathervane, being heavier, needs a stronger bracket - this has a Tee shaped backplate and three fixing holes |
RIDGE FIXING - MEDIUM AND LARGE VANES ONLY
|
|
| Place over the ridge board, in between 2 ridge tiles. The standard bracket is made for 1" ridge - if different size required, please indicate on order | Pole is 18" (med) or 24" (large) plus legs 6" long to go over ridge board. The legs are pre-drilled with 4 off 9/32" dia holes |
POST FIXING - MEDIUM AND LARGE VANES ONLY
|
|
|
| Use for fixing to a flat horizontal surface, such as the top of a post or cross bar of pergola | The base plate has 4 x 7/32" dia (med size vane) or 9/32" dia (large size vane) fixing holes. The plate is 70mm square. |
CLOCKTOWER FIXING - MEDIUM AND LARGE VANES ONLY
|
Use on a clocktower, or where the roof comes to a point. See right for detail |
|
SIDE PLATE FIXING - MEDIUM AND LARGE VANES ONLY
|
|
| Use to attach to upright of pergola or any other side-fixing application where there is no overhang. Hole sizes 7/32" or 9/32" dia as above |
